home *** CD-ROM | disk | FTP | other *** search
- Path: ame.osn.de!turtle.insider.sub.de
- From: TOLKIEN@TURTLE.INSIDER.SUB.DE (Klaus Gillarek)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: HP ScanJet 3C
- Date: 13 Mar 96 01:23:41 +0100
- Message-ID: <38151535@tolkien.turtle.insider.sub.de>
- References: <313E434B.4E4E@kpmg.com>
- X-Mailer: UMSZer V2.22 public
- X-Gateway: ZCONNECT UH ame.osn.de [UUCPfZ V5.73 U003]
- X-ZC-Telefon: 09112449233
- X-ZC-Post: Klaus Gillarek; Winklerstr. 29; 90403 Nuernberg
-
- Bob Richardson schrieb in zco.COMP.SYS.AMIGA.HARDWARE ueber "HP ScanJet
- 3C":
- > I have a HP Scanjet 3C hooked up to my beemer. I would like to be able
- > to use
- > it directly with my Amiga. Does anyone know what software (if any)
- > supports
- > the HP 3C? After talking with the tech support people for ImageFX he
- > said
- > that he was sure that they supported the HP 2C but had never tested the
- > 3C.
- > Just in case it matters I am using a brand new A4000T with the built in
- > SCSI2
- > card.
-
- I have both, ImageFX 2.1a an the 3c. They work fine together. But I only can
- speech for a Fastlane Z3 Controller. I don't know something about the A4000
- built in Controller.
- There is a Software called Scancenter 1.2 in the Aminet. Its specially for
- HP-Scanner. But I haven't tested it.
- There is one posibility for the people who use the Shapeshifter MAC-Emulator.
- The HP own Scanningsoftware called DeskScan 2.3 works very good. I sometimes
- scan with this, sometimes with ImageFX.
-
- ---
- Mit besten Gruessen
-
- Klaus Gillarek tolkien@turtle.insider.sub.de
- sz0931@rzmail.uni-erlangen.de
- 2:2490/1370.17@fidonet
-
-